"The statue factory" By robblu (https://pastebin.com/u/robblu) URL: https://pastebin.com/wXky5MP7 Created on: Saturday 11th of February 2017 01:08:46 PM CDT Retrieved on: Saturday 31 of October 2020 03:23:29 AM UTC The statue factory Today was an exciting day for Linda. She was on her way to the statuary factory, a business that specialized in production of life-like human statues. In fact they were modelled after living humans. That being said they prided themselves in being totally eco friendly and virtually no post production waste was produced. Of course the statues were made using living human models. The final product was a replica of the model with movable joints and many of the features of an actual living person. There were also other products made possible as a by-product of the statue production including high grade meat cuts and other delectable items. The models were chosen from both volunteers and others who where were called for processing and desired a more memorable demise. Linda was a volunteer. She had seen a number of the statues used for various purposes and was impressed by the totally natural appearance. Being aware that all females were subject to call for processing at any time after their 18th birthday and she was now 20 she decided she might as well volunteer and be processed in a way that would be the most efficient and produce long term enjoyment for someone. Yesterday she had begun to prepare for the big day by shaving her entire body except for her head and giving herself a through enema and vaginal cleansing as instructed. She entered the factory and was greeted by a female receptionist. All of the registration formalities were attended to and she was directed to a small room, instructed to remove all of her clothing and proceed through the next door. She quickly removed her clothes and began to feel a little excited and nervous at the same time. After a short time contemplating what would happen next she stepped walked through the door and was met by a male attendant. In the room were a number of frames large enough to hold a human with arms spread to the side and feet spread to shoulder width. She was lead to one of the frames and instructed to step up on two wooden blocks on the bottom of the frame. The attendant proceeded to place restraints around her ankles and attach them to the frame. He also began to explain what was going to happen over the next few hours. He told her she was being securely bound in the frame and a mould of her body was going to be made. When the mould was fully cured she would be removed from it and a casting would be made which would contain many details of her body including ears, nose, mouth, vagina and rectum cavities. While she was encased in the moulding material a process would be started by chemicals mixed into the material which would turn her skin into durable “hide” material. Once the mould was completely cured she would be removed and a casting of her body would be made. While the casting was being made she would remain restrained while suspended off the floor and warm air would be circulated over her body. The air was not intended to keep her warm and comfortable but rather to finish the final tanning of her skin. This gave Linda a bit of a scare but by this time her arms were firmly secured at the wrists and elbows so they were slightly away from her body. Restraints were also placed around her waist, on her head and shoulders with the end result of locking here firmly into the frame. She was now unable to move and decided this was how she wanted to be processed so her mind was at ease. Finally Linda’s hair was sprayed with a lacquer substance which quickly dried making her hair very stiff. Once hardened her hair was shaved off resulting in a sort of wig. This would be used on the final Linda statue once the process was completed. The frame was then laid flat on a table with Linda on her back. Unable to move, Linda’s nose and mouth had tubes inserted to allow here to breathe and a thick liquid was pumped into them. Next her ears were filled followed by her rectum. She could feel it trying to ooze out but when it reached the open air it quickly solidified leaving a small blob extending from her ass. Next her vagina was pumped full in the same way with the same results when it reached the air. The internal material in all of her orifices soon became hard making it impossible for it to be expelled. Her eyes were also closed and covered with gauze saturated with the same material. Her entire body was then wrapped in a plastic membrane that was heated causing it to shrink to match every contour of Linda’s body. Once cooled, this material became rigid and the bubble formed around her body was carefully cut away using a precision laser to perfectly match the shape of her body. Linda had been bound in the frame in such a way that the front half of her body extended above the edge of the frame and her back half was inside the frame. The plastic would act as a separator allowing the mould to be easily removed once it was fully cured. A second frame was then placed on top of the first frame, a plate attached to the bottom of the frame in which she was restrained and she was suspended in the middle of a box. With Linda now completely restrained, the top and bottom sections of the box were filed with the casting compound and allowed to cure. The material that had been pumped into Linda’s orifices was flexible so when the casting compound was fully cured the top half of the frame could be lifted taking with it half of the mould and also the “plugs” that had been placed in her ears, nose, mouth and vagina. Linda’s body was then removed from the lower portion of the mould, extracting the material in her rectum and leaving it attached to the lower half of the cast. Using the restraints already in place Linda was then suspended on an overhead rail in the same position as the frame had held her and she was moved into another room. There warm air was circulated across her to complete the tanning. The now cured “plugs” pumped into her orifices were covered with plastic shrink wrapping and heated to allow the casting compound to release when the same casting liquid was poured into the mould. A few additional accessories were also installed in the mould for purposes that will be explained soon. The two parts of the mould were reassembled and filed with the same liquid rubber material pumped into her orifices and allowed to cure. Because the moulding process had caused all of the material inserted into her body cavities to attach to the main mould the final casting was a virtual duplicate of Linda’s body, minus her skin. A few minor touch-ups and adjustments of the cast and virtual Linda was brought in and placed in front of Linda. Now all that was required was for Linda’s tanned hide to be removed from her body and placed on virtual Linda. This was easily accomplished using another laser to cut through her tanned hide. Starting at her neck a cut was made around her neck and then cuts were made down her left and right sides. They were made by cutting down the outside of each arm, continuing back up the inside to the armpits. Then a cut was made all the way down each side to the feet, across the bottom of the feet and back up the inside of the legs to her crotch. The result was the tanned hide was easily pealed off from the neck down on the front and back. It was then placed on virtual Linda and the seams were joined using special “super glue” that invisibly welded the two halves together. While this was being done Linda marvelled that she felt no pain and remained fully conscious. This was because all the nerves in the skin and for a slight dept into the rest of her body were numbed by the tanning process. Also, blood flow to the now exposed layer had been cauterized so there was no bleeding. The final step to constructing virtual Linda was to remove the head hide in a similar way and place it on virtual Linda. Eyes were installed in virtual Linda using prosthetic eyeballs which actually had a number electronic activators which moved them and actually dilated the pupils in order to give the appearance of life. Other body orifices also had actuators installed which caused the nose to breath and the vagina and rectum were fitted to provide contractions, should virtual Linda be used for sexual gratification. Linda’s hair was placed on virtual Linda’s head and then virtual Linda was turned in order to display the full body to the living, for now, Linda. Linda once again marvelled at the attention to detail that had been done with virtual Linda and knew virtual Linda would continue to please far into the future. The remaining work to be done was to decide how Linda was to be utilized. It was decided that she would be prepared as a spit roast. She was subsequently taken to the spitting room. In order to assure no damage to the subject and to allow her to enjoy her processing to the fullest, Linda was mounted on a spit by tying her to the spit. Her internal organs were selectively removed allowing her to remain alive for as long as possible over the coals. Linda managed to relax and stay alive for over an hour before expiring. She was served to a large BBQ gathering and everyone ate their fill. As we said earlier, nothing went to waste. Linda’s bones and unconsumed meat was later boiled in a stew and finally her bones were used to make gelatine. Noting went to waste.